30” OD x 26’ S/S rated 1435 psig @ 130 F Dehy

Q14-020 P&ID(1).jpg
Q14-020 P&ID(1).jpg

30” OD x 26’ S/S rated 1435 psig @ 130 F Dehy

0.00

EVS-16013

 

Inlet Separator, vessel size 30” OD x 26’ S/S rated 1435 psig @ 130 0 F
8 tray 3 Phase
Design Pressure 1440 PSIG
C/A: 0.125”
MDMT -200 F
DEMISTER:    6" Thick x 9 /ft3 316 SS Mesh SS Grid
Structured packing internals.

CORR. ALLW.:    1/8"
SERVICE:    Sour
RADIOGRAPHY:    100% as per ASME code
INSPECTED BY:    ABSA
APPROVED BY:    Boilers Branch Alberta, Saskatchewan, BC
CODE:    ASME SECTION VIII, DIVISION 1. Vessel U-Stamped.
C/A: 0.125”
MDMT -200 F
DEMISTER:    6" Thick x 9 /ft3 316 SS Mesh SS Grid
Structured packing internals.
Special chemistry is not requested
Vessel Compress calculations
Vessel GA and sections
Bill of materials
SPECIFICATIONS
CORR. ALLW.:    1/8"
SERVICE:    Sour
RADIOGRAPHY:    100% as per ASME code
INSPECTED BY:    ABSA
APPROVED BY:    Boilers Branch Alberta, Saskatchewan, BC
CODE:    ASME SECTION VIII, DIVISION 1. Vessel U-Stamped.
SIZE:    30" OD x 26’-0” Seam to Seam
CONSTRUCTION
SHELL:    SA-516-70N Plate
HEADS:    SA-516-70N SE Heads
DEMISTER:    6" Thick x 9 /ft3 316 SS Mesh SS Grid (Qty. 2)
TRAYS:    Eight (8) Standard trays with CS bubble caps (16 gauge)
INTERNALS:    SA-36 CS Inlet baffle, splash guard, Etc.
EXTERNALS:    SA-36 CS lifting lugs Etc.
SKIRT:    SA-36  Structural Pipe
BASE PL. :    SA-36 CS
MODEL:    SM628.
SIZE:    6 “NPS x 28" S/S rated @ MAWP of 270 Psig at 150 Deg. F
CONSTRUCTION:
•    Stock standard, SA-106B pipe shell, SA-234-WPB Heads, 1" NPT 3000# inlet, 1" NPT 3000# outlet, 1" NPT Drain
Reboiler:
Duty: 500,000 mmbtu/Hr.
Design: Standard, Atmospheric Non-Pressure Code
Size: 36” OD x 10’-0” L
Fire Tube Size: 12.75” OD, Removable, CS, 3/8” thick wall pipe c/w removable flame arrestor, Eclipse main and pilot burners, lighting access and peep sight
Insulation: 1.5” Thick semi-Rigid fiberglass insulation c/w 0.020" thick  aluminum cladding excluded on end plates
Stack height: 16’, Removable, ¼” wall structural ERW weld pipe c/w down-draft diverter.
Accumulator:
Size: 36” OD x 8’-0” STD wall structural ERW pipe shell
Still Column:
Size: 12.75” OD x 9’-6” CS, 3/8” thick wall pipe c/w SS ring type random packing
Insulation: 1” Thick semi-Rigid fiberglass insulation c/w 0.020" thick aluminum cladding excluded on end plates.
Stripping Column:
Size: 12.75” OD x 2’-0 ” L,  CS, 3/8” thick wall pipe c/w SS ring type random packing
Insulation: 1” Thick semi-Rigid fiberglass insulation c/w 0.020" thick aluminum cladding excluded on end plates.

 

 

 

Add To Cart

 

Calgary AB

New